DTC U0534:68 [BLIND SPOT MONITORING (BSM) CONTROL MODULE CONNECTOR 8-PIN TYPE]
id0902q2393400
|
Description |
Error signal from BSM control module (RH) |
|---|---|
|
Detection condition
|
• BSM control module (LH) receives the error signal from the BSM control module (RH) for 1 s or more.
|
|
Possible cause
|
• BSM control module (RH) malfunction
• BSM control module (LH) malfunction
|
Diagnostic procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
PERFORM DTC INSPECTION AND VERIFY BSM CONTROL MODULE (RH) MALFUNCTION
• Clear the DTC for the BSM control module (LH) using the M-MDS.
• Retrieve the BSM control module (LH) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the BSM control module (RH), then go to the next step.
|
|
No
|
Go to Step 3.
|
||
|
2
|
VERIFY DTC TROUBLESHOOTING COMPLETED
• Clear the DTC for the BSM control module (LH) using the M-MDS.
• Retrieve the BSM control module (LH) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the BSM control module (LH).
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||