FRONT TILT MOTOR INSPECTION

id091300800700

1.  Disconnect the front tilt motor connector.

2.  Apply battery positive voltage to the front tilt motor terminals and inspect the front tilt motor operation.

ac9wzw00001242

•  If not as specified, replace the slide adjuster. (See FRONT SEAT SLIDE ADJUSTER REMOVAL/INSTALLATION.)

Motor operation	Connection
	B+	GND
Up	E	D
Down	D	E

3.  Connect the front tilt motor connector.

4.  Measure the front tilt motor terminal A waveform during motor operation using the oscilloscope.

Condition	Voltage (V)
High output	4.8 or more
Low output	1.0 or less