SECURITY AND LOCKS PERSONALIZATION FEATURES

id091400590200

•  A personalization features that switches the activation/deactivation of each function has been adopted.
•  The setting of the following system functions, and warning and guidance functions can be turned ON/OFF optionally.
•  Refer to the Workshop Manual for the detailed setting procedure.

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting content

Control unit
Answer Back Buzzer
Answer back buzzer function can be set.
Enabled
Disabled/ Enabled
Keyless control module
Card key battery low warning
Advanced key remaining battery level/battery dead warning can be set.
Enabled
Disabled/ Enabled
Keyless control module
Automatic Locks
Automatic locks function can be set.
Disabled
Disabled/ Enabled
Keyless control module
Two(2) stage door unlocking by request switch.
2-step unlocking system can be set.
Enabled
Disabled/ Enabled
Keyless control module
Two(2) stage door unlocking by transmitter.
2-step unlocking system can be set.
Enabled
Disabled/ Enabled
Keyless control module
Auto relock timer (with AKE)
The operation start time of the auto re-lock function can be changed.
60s
30s/60s/90s
Keyless control module


Setting Method By Operation Of Door Lock Switch (With Auto Door Lock System)

Setting content

Function

Initial setting

Control unit
Disabled
Auto lock/unlock function can be changed.
Auto door lock operation based on vehicle speed. Auto door unlock operation based on ignition switch position.
BCM
Auto door lock operation based on vehicle speed.
Auto door lock operation based on vehicle speed. Auto door unlock operation based on ignition switch position.
Auto door lock operation based on shift position.
Auto door lock operation based on shift position. Auto door unlock operation based on shift position.