ON-BOARD DIAGNOSIS SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM) MALFUNCTION DIAGNOSIS FUNCTION


id091400601400


On-board Diagnostic Function


Malfunction detection function

•  Detects overall malfunctions in the keyless entry system-related parts.


Display function

•  If any malfunction is detected, the keyless warning light (red) in the instrument cluster illuminates to inform the driver of a system malfunction.


Memory function

•  Stores malfunctions in the keyless entry system-related parts detected by the malfunction detection function, and the stored malfunction contents are not cleared even if the ignition switch is turned to the OFF position or the negative battery cable is disconnected.

DTC table

DTC

System malfunction location

Mazda Modular Diagnostic System (M-MDS) display

B1093
Steering lock unit communication error
B1126
Steering lock unit internal malfunction
B1127
Keyless antenna (Interior, rear)
B1128
Keyless antenna (Interior, middle)
B1129
Keyless antenna (Interior, front center)
B1131
Keyless antenna (exterior, rear)
B1132
Keyless antenna (exterior, LF)
B1133
Keyless antenna (exterior, RF)
B1134
Unprogrammed card key
B1213
Only one key ID number is programmed.
B1317
Keyless control module power supply voltage increases.
B1318
Keyless control module power supply voltage decreases
B1342
Keyless control module internal malfunction
B1681
No detected communication with the coil antenna.
B2103
Coil malfunction
B2170
Push switch (Steering lock unit)
B2477
Configuration error
U0073
Control module communication error
U0100
Communication error to PCM
U0214
Keyless receiver
U0236
Steering lock unit communication system
U0323
Communication error to instrument cluster
U2023
Error signal from CAN related module