CUSTOMIZED FUNCTION SETTING PROCEDURE [ADVANCED KEYLESS ENTRY AND START SYSTEM]

id0914008074z6

Using M-MDS

1. Connect the M-MDS to the DLC-2.

ac9uuw00000452

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

1. Select the “Module Programming”.

3. Then, select items from the screen menu in the following order.

1. Select “Programmable Parameters”.

2. Select “RKE(Remote Keyless Entry)”.

4. Select an item name, and then select option.

Caution

• Do not change customized function which are not indicated in the workshop manual.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting content

Control unit

Answer Back Buzzer

Answer back buzzer function can be set.

Enabled

Disabled/ Enabled

Keyless control module

Card key battery low warning

Advanced key remaining battery level/battery dead warning can be set.

Enabled

Disabled/ Enabled

Keyless control module

Automatic Locks

Automatic locks function can be set.

Disabled

Disabled/ Enabled

Keyless control module

Two(2) stage door unlocking by request switch.

2-step unlocking system can be set.

Enabled

Disabled/ Enabled

Keyless control module

Two(2) stage door unlocking by transmitter.

2-step unlocking system can be set.

Enabled

Disabled/ Enabled

Keyless control module

Auto relock timer (with AKE)

The operation start time of the auto re-lock function can be changed.

60s

30s/60s/90s

Keyless control module

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting content	Control unit
Answer Back Buzzer	Answer back buzzer function can be set.	Enabled	Disabled/ Enabled	Keyless control module
Card key battery low warning	Advanced key remaining battery level/battery dead warning can be set.	Enabled	Disabled/ Enabled	Keyless control module
Automatic Locks	Automatic locks function can be set.	Disabled	Disabled/ Enabled	Keyless control module
Two(2) stage door unlocking by request switch.	2-step unlocking system can be set.	Enabled	Disabled/ Enabled	Keyless control module
Two(2) stage door unlocking by transmitter.	2-step unlocking system can be set.	Enabled	Disabled/ Enabled	Keyless control module
Auto relock timer (with AKE)	The operation start time of the auto re-lock function can be changed.	60s	30s/60s/90s	Keyless control module

Setting Method By Operation Of Door Lock Switch

Auto door lock system

Setting content

Function

Initial setting

Control unit

Disabled

Auto lock/unlock function can be changed.

Auto door lock operation based on vehicle speed. Auto door unlock operation based on ignition switch position.

BCM

Auto door lock operation based on vehicle speed.

Auto door lock operation based on vehicle speed. Auto door unlock operation based on ignition switch position.

Auto door lock operation based on shift position.

Auto door lock operation based on shift position. Auto door unlock operation based on shift position.

Setting content	Function	Initial setting	Control unit
Disabled	Auto lock/unlock function can be changed.	Auto door lock operation based on vehicle speed. Auto door unlock operation based on ignition switch position.	BCM
Auto door lock operation based on vehicle speed.
Auto door lock operation based on vehicle speed. Auto door unlock operation based on ignition switch position.
Auto door lock operation based on shift position.
Auto door lock operation based on shift position. Auto door unlock operation based on shift position.

Setting procedure

ac9wzw00003166