FRONT SASH MOLDING REMOVAL

id091600805000

Warning

•  Using a razor with bare hands can cause injury. Always wear gloves when using a razor.

1.  Remove the power outer mirror. (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)

2.  Press tab A in the direction of the arrow and remove it.

ac9uuw00002048

3.  While cutting the double-sided adhesive tape using a flathead screwdriver or a razor, separate the front sash molding from the body.

4.  Rotate the front sash molding at the pivot of tab B in the direction of arrow D and remove it.

5.  Remove the tab C.

6.  Remove the front sash molding.