AUTO LIGHT/WIPER CONTROL MODULE INSPECTION


id091800809500

1.  Remove the dashboard under cover (Driver side). (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

2.  Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).

•  If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.
―  If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the auto light/wiper control module.


Terminal Voltage List (Reference)

ac9wzw00002573

Terminal

Signal

Connection

Test condition

Voltage (V)

Action

1A
Headlight relay (LO) operation
Headlight relay (LO)
Light switch at HEAD or HI position
1.0 or less
•  Headlight relay (LO)
Light switch at OFF or TNS position
B+
1B
IG1
METER 10 A fuse
Ignition switch at ON
B+
•  METER 10 A fuse
Ignition switch at OFF or ACC
1.0 or less
1C
Autostop switch signal
Autostop switch
Ignition switch at ON
Windshield wiper moving
B+
•  Autostop switch (Windshield wiper motor)
Windshield wiper stopped
1.0 or less
1D
Windshield wiper switch signal (OFF)
Windshield wiper and washer switch
Ignition switch at ON
Windshield wiper moving
B+
•  Windshield wiper and washer switch
Windshield wiper stopped
1.0 or less
1E
IG2
WIPER 30 A fuse
Ignition switch at ON
B+
•  WIPER 30 A fuse
Ignition switch at OFF or ACC
1.0 or less
1F
Windshield wiper switch signal (HI)
Windshield wiper and washer switch
Ignition switch at ON
Windshield wiper switch at HI position
B+
•  Windshield wiper and washer switch
Windshield wiper switch at OFF position
1.0 or less
1G
Power ground
GND
Under any condition
1.0 or less
•  Power ground
1H
Windshield wiper switch signal (AUTO)
Windshield wiper and washer switch
Ignition switch at ON
Windshield wiper switch at AUTO position
B+
•  Windshield wiper and washer switch
Other
1.0 or less
1I*2
Running light control
Running light (LH, RH)
Ignition switched ON (engine off) and light switch OFF
Running light illuminates
B+
•  Running light (LH, RH)
Running light turns off
1.0 or less
1J
Washer switch signal
Windshield wiper and washer switch
Ignition switch at ON
Washer switch at ON position
B+
•  Windshield wiper and washer switch
Washer switch at OFF position
1.0 or less
1K
Headlight relay (HI) operation
Headlight relay (HI)
Light switch at OFF or HI or TNS position
1.0 or less
•  Headlight relay (HI)
Light switch at HEAD position
B+
1L
Light switch signal (LOW)
Light switch
Ignition switch at ON
Light switch at HI or PASS position
B+
•  Light switch
Other
1.0 or less
2A*1
Rear fog light control
Rear fog light relay
Light switch at TNS or HEAD position
Rear fog light switch at ON position
1.0 or less
•  Rear fog light relay
Rear fog light switch at OFF position
B+
2B
Sensitivity adjustment volume
Windshield wiper and washer switch
Ignition switch at ON
Sensitivity adjustment volume turned from + position to - position
0 → 0.8 → 1.5 → 1.9 → 2.2
•  Windshield wiper and washer switch
2C
Light switch signal (PASS)
Light switch
Light switch at PASS position
1.0 or less
•  Light switch
Light switch at OFF position
B+
2D
Power supply
•  BCM
•  ROOM 15 A fuse
Under any condition
B+
•  BCM
•  ROOM 15 A fuse
2E
Wiper or headlight operation request
Rain sensor
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
•  Rain sensor
2F
DLC-2
DLC-2
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
•  DLC-2
2G
TNS relay operation
TNS relay
Light switch at TNS or HEAD position
Below 1.5
•  TNS relay
Light switch at OFF
B+
2H
Rain sensor operation request
Rain sensor
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
•  Rain sensor
2I
Front fog light relay on/off
Front fog light relay
Light switch at TNS or HEAD position
Front fog light switch at ON position
1.0 or less
•  Front fog light relay
Front fog light switch at OFF position
B+
2J
Front fog light on/off
Front and rear fog light switch
Front and rear fog light switch at OFF position
Front fog light switch at ON position
1.0 or less
•  Fog light switch
Front fog light switch at OFF position
B+
2K*1
Rear fog light switch signal
Rear fog light switch
Light switch at TNS or HEAD position
Rear fog light switch at ON position
1.0 or less
•  Rear fog light switch
Rear fog light switch at OFF position
B+
2L
Light switch signal (AUTO)
Light switch
Ignition switch at ON
Light switch at AUTO position
1.0 or less
•  Light switch
Other
B+
2M
Light switch signal (TNS)
Light switch
Ignition switch at ON
Light switch at TNS or HEAD position
1.0 or less
•  Light switch
Other
B+
2N
Light switch signal (HEAD)
Light switch
Ignition switch at ON
Light switch at HEAD position
1.0 or less
•  Light switch
Other
B+
2O
GND
GND
Under any condition
1.0 or less
•  Body ground
2P
BCM signal
BCM
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
•  BCM

*1  :With Rear fog light
*2  :With Running light