WINDSHIELD WIPER MOTOR INSPECTION

id091900801100


L.H.D.

1.  Disconnect the windshield wiper motor connector.

2.  Connect battery positive voltage to windshield wiper motor terminal A or B, and ground to terminal D, then verify that the windshield wipers operate as shown in the table.

ac9wzw00001591

•  If the windshield wipers do not operate as indicated in the table, replace the windshield wiper motor. (See WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION.) (See WINDSHIELD WIPER MOTOR DISASSEMBLY/ASSEMBLY.)

Terminal connected to battery positive voltage

Operation condition
A
LO
B
HI

3.  Disconnect battery positive voltage from the motor terminal A while the wipers are operating.

4.  Verify that the wipers do not stop in the park position.

5.  Short between the motor terminals A and E, and connect battery positive voltage to the motor terminal C.

6.  Verify that the wipers operate at low speed again, then stop in the park position.

•  If there is any malfunction, replace the windshield wiper motor. (See WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION.) (See WINDSHIELD WIPER MOTOR DISASSEMBLY/ASSEMBLY.)


R.H.D.

1.  Disconnect the windshield wiper motor connector.

2.  Connect battery positive voltage to windshield wiper motor terminal D or E, and ground to terminal B, then verify that the windshield wipers operate as shown in the table.

ac9wzw00001592

•  If the windshield wipers do not operate as indicated in the table, replace the windshield wiper motor. (See WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION.) (See WINDSHIELD WIPER MOTOR DISASSEMBLY/ASSEMBLY.)

Terminal connected to battery positive voltage

Operation condition
D
LO
E
HI

3.  Disconnect battery positive voltage from the motor terminal D while the wipers are operating.

4.  Verify that the wipers do not stop in the park position.

5.  Short between the motor terminals D and A, and connect battery positive voltage to the motor terminal C.

6.  Verify that the wipers operate at low speed again, then stop in the park position.

•  If there is any malfunction, replace the windshield wiper motor. (See WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION.) (See WINDSHIELD WIPER MOTOR DISASSEMBLY/ASSEMBLY.)