GPS ANTENNA FEEDER INSPECTION

id092000802100

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)

(2)  Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)

(3)  Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(4)  Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(5)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(6)  Car-navigation unit (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)

3.  Disconnect the GPS antenna connector. (See GLOBAL POSITIONING SYSTEM (GPS) ANTENNA REMOVAL/INSTALLATION.)

4.  Verify that the continuity is as indicated in the table.

With car-navigation system (without display)

ac9wzw00002865

With car-navigation system (with display)

acxuuw00003354

•  If not as indicated in the table, replace the GPS antenna feeder.

acxuuw00003355