STEERING SWITCH INSPECTION

id092000822400

Without Bluetooth System

1.  Disconnect the negative battery cable and wait for 1 min or more.

2.  Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

3.  Disconnect the steering switch connector.

4.  Verify the resistance between the steering switch terminals.

ac9wzw00002855

•  If not within the specification, replace the steering switch.

ac9wzw00002856

ac9wzw00002858

5.  Apply battery positive voltage to steering switch terminal A, and connect terminal E to ground.

ac9wzw00002857

6.  Verify that the LED illuminates.

•  If the LED does not illuminate, replace the steering switch.

With Bluetooth System

1.  Disconnect the negative battery cable and wait for 1 min or more.

2.  Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

3.  Disconnect the steering switch connector.

4.  Verify the resistance between the steering switch terminals.

ac9wzw00002859

•  If not within the specification, replace the steering switch.

ac9wzw00002860

ac9wzw00002861

5.  Apply battery positive voltage to steering switch terminal D, and connect terminal E to ground.

ac9wzw00002912

6.  Verify that the LED illuminates.

•  If the LED does not illuminate, replace the steering switch.