ULTRASONIC SENSOR SHORT-CORD INSPECTION

id092200037000

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Rear combination light (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)

(2)  Rear bumper (See REAR BUMPER REMOVAL/INSTALLATION.)

(3)  Rear reflector (See REAR BUMPER DISASSEMBLY/ASSEMBLY.)

(4)  Ultrasonic sensor short-cord (See ULTRASONIC SENSOR SHORT-CORD REMOVAL/INSTALLATION.)

3.  Verify that the continuity between the ultrasonic sensor short-cord terminals is as indicated in the table.

ac9wzw00002680

ac9wzw00002681

•  If not as indicated in the table, replace the ultrasonic sensor short-cord.