WHEEL UNIT ID REGISTRATION

id021200700700

Note

•  After the wheel unit replacement, registration of the wheel unit identification codes must be performed.

•  After the LF control unit replacement, registration of the wheel unit identification codes must be performed.

1.  Switch the main power ON (READY off).

2.  Switch the main power OFF.

3.  Leave the vehicle with the main power is switched off for 19 min or more.

4.  Switch the main power ON (READY on).

5.  Drive the vehicle at a speed of 25 km/h {16 mph} or more for 3 min or more.

6.  After driving for 3 min, verify that the TPMS warning light does not flash and is not illuminated.