BRAKE FLUID LEVEL SENSOR INSPECTION

id041100700700

1.  Connect the M-MDS to the DLC-2.

2.  Switch the main power ON (READY off).

3.  Display electronically controlled brake unit PID BRK_FLD_STAT.

(See PID/DATA MONITOR INSPECTION.) (See PID/DATA MONITOR TABLE [ELECTRONICALLY CONTROLLED BRAKE UNIT].)

4.  Verify that the fluid level (PID: BRK_FLD_STAT) changes according to the brake fluid reserve tank fluid level.

(See PID/DATA MONITOR TABLE [ELECTRONICALLY CONTROLLED BRAKE UNIT].)

•  If it cannot be verified, replace the electronically controlled brake unit.

(See ELECTRONICALLY CONTROLLED BRAKE UNIT REMOVAL/INSTALLATION [L.H.D.].) (See ELECTRONICALLY CONTROLLED BRAKE UNIT REMOVAL/INSTALLATION [R.H.D.].)