DTC U0140:00 [SELECTOR LEVER]

id0502z3908600

Outline

System malfunction location

CAN communication: Communication error with body control module (BCM)

Detection condition

•  The selector lever cannot receive a signal from the body control module (BCM).

Fail-safe

Refer to the DTC table and fail-safe table according to the DTC. (See DTC TABLE [SELECTOR LEVER].)

Vehicle status when DTCs are output

Not applicable

Possible cause

•  Malfunction in CAN line between selector lever and body control module (BCM)

•  Selector lever malfunction

System wiring diagram

Not applicable

Connector diagram

Not applicable

System malfunction location	CAN communication: Communication error with body control module (BCM)
Detection condition	• The selector lever cannot receive a signal from the body control module (BCM).
Fail-safe	Refer to the DTC table and fail-safe table according to the DTC. (See DTC TABLE [SELECTOR LEVER].)
Vehicle status when DTCs are output	Not applicable
Possible cause	• Malfunction in CAN line between selector lever and body control module (BCM) • Selector lever malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable

Diagnostic Procedure

• Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system.(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [L.H.D. (E)].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [R.H.D.].)