DTC U0001:88 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM) (E)]

id0802i2705200

Note
•  The SRS air bag system can be identified by whether or not the seat track position sensor is present.
―  Standard deployment control system: Without seat track position sensor
―  Two-step deployment control system: With seat track position sensor

Outline

System malfunction location

Unit communication error (HS-CAN)
Detection condition
•  SAS control module detects a CAN communication line (HS-CAN) error.
Fail-safe
•  Not applicable
Possible cause
•  Malfunction in CAN bus communication line
System wiring diagram
•  Not applicable
Connector diagram
•  Not applicable


Diagnostic Procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system.(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [L.H.D. (E)].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [R.H.D.].)