PID/DATA MONITOR TABLE [EMERGENCY CALL UNIT (E)]
id0902sc128200
|
PID |
Unit/Operation |
Data contents |
Module control terminal |
|---|---|---|---|
|
ALRM_NOTIFIC
|
OFF/ON
|
• OFF: Alarm notification setting is off.
• ON: Alarm notification setting is on.
|
—
|
|
BACKUP_BATT_AVAIL
|
available/NOT available
|
• available: Built-in battery is usable.
• NOT available: Built-in battery is not usable.
|
—
|
|
BACKUP_BATT_CHG_STAT
|
Normal/charging/discharging
|
• Normal: Backup power supply is neither charging or discharging.
• charging/discharging: Backup power supply is charging/discharging.
|
—
|
|
BACKUP_BATT_REMAIN
|
%
|
Displays battery level of backup power supply.
|
—
|
|
BACKUP_BATT_STAT
|
V
|
Displays built-in battery voltage.
|
—
|
|
CELLULAR_ACCOUNT
|
OFF/ON
|
• OFF: Usable phone number is not registered.
• ON: Usable phone number is registered.
|
—
|
|
DIGITAL_NETWORK_NUM
|
—
|
Displays emergency call unit phone number
|
—
|
|
EUICC_ID
|
—
|
Displays identification number of emergency call unit.
|
—
|
|
GNSS_ALTITUDE
|
m
|
Displays sea level altitude received from GNSS
|
2B
|
|
GNSS_EGNOS_NUM
|
—
|
Displays number of all EGNOS satellites receiving position information
|
2B
|
|
GNSS_GALILEO_NUM
|
—
|
Displays number of all Galileo satellites receiving position information
|
2B
|
|
GNSS_GLONASS_NUM
|
—
|
Displays number of all GLONASS satellites receiving position information
|
2B
|
|
GNSS_GPS_NUM
|
—
|
Displays number of all GPS satellites receiving position information
|
2B
|
|
GNSS_HEADING
|
° (deg)
|
Displays vehicle angle received from GNSS (Based on magnetic north).
|
2B
|
|
GNSS_LATITUDE
|
milliarcseconds
|
Displays altitude received from GNSS
|
2B
|
|
GNSS_LONGITUDE
|
milliarcseconds
|
Displays longitude received from GNSS
|
2B
|
|
GNSS_STAT
|
No fix/2D fix/3D fix/Antenna not properly connected
|
• No fix: Position information is not received from GNSS.
• 2D fix: 2D position information is received from GNSS.
• 3D fix: 3D position information is received from GNSS.
• Antenna not properly connected: An antenna is not connected appropriately
|
2B
|
|
GNSS_UTC
|
sec
|
Displays coordinated universal time
|
2B
|
|
GNSS_VELOCITY
|
km/h
|
Displays vehicle speed detected from GNSS
|
2B
|
|
IG_STAT
|
OFF/ON
|
OFF: IG1 power supply voltage is low.
ON: IG1 power supply voltage is high.
|
1AE
|
|
IMEI
|
—
|
Displays emergency call unit identification number
|
—
|
|
IMSI
|
—
|
Displays stored IMSI No.
|
—
|
|
LOCATION_INFO
|
OFF/ON
|
• OFF: Location information setting is off.
• ON: Location information setting is on.
|
—
|
|
MAINT_ASSIST
|
OFF/ON
|
• OFF: Vehicle health report setting is off.
• ON: Vehicle health report setting is on.
|
—
|
|
OPERAT_FORGOTTEN
|
OFF/ON
|
• OFF: Vehicle status alert setting is off.
• ON: Vehicle status alert setting is on.
|
—
|
|
OPERAT_MONITOR
|
OFF/ON
|
• OFF: Operation monitoring service is not usable.
• ON: Operation monitoring service is usable.
|
—
|
|
POWER_MODE
|
OFF/ACC/ON/CRANK
|
• Displays main power status.
|
1Q, 1S
|
|
RECALL_NOTIFIC
|
OFF/ON
|
• OFF: Recall notification setting is off.
• ON: Recall notification setting is on.
|
—
|
|
REMOTE_CHECK
|
OFF/ON
|
• OFF: Remote check setting is off.
• ON: Remote check setting is on.
|
—
|
|
REMOTE_CTRL
|
OFF/ON
|
• OFF: Remote control setting is off.
• ON: Remote control setting is on.
|
—
|
|
REMOTE_DIAG_RECORD
|
OFF/ON
|
• OFF: Malfunction notification setting is off.
• ON: Malfunction notification setting is on.
|
—
|
|
REMOTE_SERVICE
|
OFF/ON/None
|
• OFF: Remote service is not contracted.
• ON: Remote service is contracted.
• None: Contract of remote service is failed.
|
—
|
|
REMOTE_WRNG
|
OFF/ON
|
• OFF: Remote security alert setting is off.
• ON: Remote security alert setting is on.
|
—
|
|
SET_YEAR
|
year
|
Displays set year for upload file used by connected service function as 2 digits (00) for year 2000
|
—
|
|
SIM_INFO
|
—
|
Displays specific number attached to SIM card
|
—
|
|
SOFT_NUM
|
—
|
Displays software version of NAD (communication module) in emergency call unit
|
—
|
|
SUMMER_TIME
|
Off/On
|
• OFF: Daylight savings time is not detected.
• ON: Daylight savings time is detected.
|
—
|
|
TCU_FLAG
|
OFF/ON/Fail
|
• OFF: Emergency call unit is not contracted.
• ON: Emergency call unit is contracted.
• Fail: Contract of emergency call unit is failed.
|
—
|
|
TEL_NUM_FLAG
|
OFF/ON/Invalid/Fail
|
• OFF: Phone number is not written.
• ON: Phone number is written.
• Invalid: Phone number is written but invalid.
• Fail: Failed to write the phone number.
|
—
|
|
TEL1_ANT_3LVL
|
—
|
Displays reception signal level of TEL antenna (displays in 6 stages).
|
—
|
|
TEL2_ANT_3LVL
|
—
|
Displays reception signal level of TEL antenna (sub) (displays in 6 stages).
|
—
|
|
TIME_DIF_RATE
|
Minus/Plus
|
• Minus: Local time delayed more than GMT time.
• Plus: Local time advanced more than GMT time.
|
—
|
|
TIME_DIF_VALUE
|
Hour
|
Displays time difference relative to GMT time
|
—
|
|
TIME_SOURCE
|
CMU/TCU
|
• CMU: Time specified by information from connectivity master unit (CMU)
• TCU: Time specified by emergency call unit independently (including when it is not specified)
|
—
|
|
TRIGGER_TYPE
|
Automatic/Manual/Test(Automatic)/Test(Manual)/Driver Abnomality
|
• Automatic: Calls automatically.
• Manual: Calls manually.
• Test(Automatic): Local time delayed more than GMT time.
• Test(Manual): Calls automatically (test).
• Driver Abnomality: Local time advanced more than GMT time.
|
2A, 3A
|
|
VPWR
|
V
|
Displays voltage at emergency call unit (power supply)
|
—
|
|
VPWR_MIC
|
V
|
Displays emergency call speaker/microphone power supply voltage.
|
1E
|