POSITION MEMORY SYSTEM MEMORY CLEARING

id091300302500

1.  Connect the M-MDS to the DLC-2.

2.  Switch the main power ON (READY off).

3.  Activate the M-MDS and perform the following procedure.

(1)  Press [Start] to start the vehicle identification.

(2)  Press the [Toolbox] tab.

(3)  Press the [Work Support] icon.

(4)  Press [SEATS].

(5)  Press [Run] for [Erasing Driving Position Memories].

(6)  Confirm the Erasing Driving Position Memories procedure from Step (7) to Step (9), and press [Next].

(7)  Verify that the main power is switched ON (READY off) and press [Next].

(8)  Press [Next] to perform [Erasing Driving Position Memories].

(9)  Press [Next] to complete [Erasing Driving Position Memories].