SNAPSHOT DATA TABLE [BECM (e-SKYACTIV)]


id300201025700

—: Not applicable

Item

Unit/Condition

Definition

AMB_TEMP
°C, °F
•  Ambient air temperature
APP
%
•  Relative accelerator pedal opening angle
ASIC_STAT_1
Normal/Abnormal
•  ASIC No.1 status
ASIC_STAT_2
Normal/Abnormal
•  ASIC No.2 status
ASIC_STAT_3
Normal/Abnormal
•  ASIC No.3 status
ASIC_STAT_4
Normal/Abnormal
•  ASIC No.4 status
ASIC_STAT_5
Normal/Abnormal
•  ASIC No.5 status
ASIC_STAT_6
Normal/Abnormal
•  ASIC No.6 status
BECM_STAT
OFF/INITIAL/STANDBY/PRECHARGE/READY/DISCHARGE/POWER SUSTAIN/ISG PRECHARGE/FAIL
•  BECM status
BRK_SW
Not Stepping/Stepping
•  Brake pedal status
CELL_BAL_TEMP_MAX
°C, °F
•  Balancing circuit maximum temperature
CELL_BAL_TEMP_MAX_NUM
•  Maximum temperature balancing circuit No.
CELL_FULL_CHG_MAX
Asec
•  Maximum fully charged capacity
CELL_FULL_CHG_MAX_NUM
•  Maximum fully charged capacity cell No.
CELL_FULL_CHG_MINI
Asec
•  Minimum fully charged capacity
CELL_FULL_CHG_MINI_NUM
•  Minimum fully charged capacity cell No.
CELL_SOC_MAX
%
•  Maximum cell charging rate
CELL_SOC_MAX_NUM
•  Maximum charging rate cell No.
CELL_SOC_MINI
%
•  Minimum cell charging rate
CELL_SOC_MINI_NUM
•  Minimum charging rate cell No.
CELL_TEMP_MAX
°C, °F
•  Cell maximum temperature
CELL_TEMP_MAX_NUM
•  Maximum temperature cell No.
CELL_TEMP_MINI
°C, °F
•  Cell minimum temperature
CELL_TEMP_MINI_NUM
•  Minimum temperature cell No.
CELL_VOLT_MEASURE_MAX
V
•  Maximum cell voltage value (measurement system)
CELL_VOLT_MEASURE_MAX_NUM
•  Maximum voltage value (measurement system) cell No.
CELL_VOLT_MEASURE_MINI
V
•  Minimum cell voltage value (measurement system)
CELL_VOLT_MEASURE_MINI_NUM
•  Minimum voltage value (measurement system) cell No.
CELL_VOLT_MONITOR_MAX
V
•  Maximum cell voltage value (monitoring system)
CELL_VOLT_MONITOR_MAX_NUM
•  Maximum voltage value (monitoring system) cell No.
CELL_VOLT_MONITOR_MINI
V
•  Minimum cell voltage value (monitoring system)
CELL_VOLT_MONITOR_MINI_NUM
•  Minimum voltage value (monitoring system) cell No.
DC_CHG_VOLT
V
•  QBC monitor voltage value
ENG_RUN_TIME
Second
•  EV system total operating time
GLOBAL_REAL_TIME
min
•  Total elapsed time since vehicle completion
HV_BATT_CUR
A
•  High voltage battery actual current value
HV_BATT_CUR_HI
A
•  High voltage battery (Hi range) current value
HV_BATT_CUR_LO
A
•  High voltage battery (Lo range) current value
HV_BATT_INTL_RES_CHG
mOhm
•  High voltage battery internal resistance value (charging side)
HV_BATT_INTL_RES_DISCHG
mOhm
•  High voltage battery internal resistance value (discharging side)
HV_BATT_SOC
%
•  High voltage battery charging rate
HV_BATT_SOC_EST
%
•  High voltage battery estimated charging rate
HV_BATT_SOHC_EST
%
•  High voltage battery capacitance deterioration (decrease from 100% according to deterioration)
HV_BATT_SOHR_EST
%
•  High voltage battery internal resistance deterioration (increase from 0% according to deterioration)
HV_BATT_TEMP_MAX
°C, °F
•  High voltage battery maximum temperature
HV_BATT_VOLT
V
•  High voltage battery actual voltage value
IG_ON_TIMER
Min
•  Elapsed time after main power is switched ON
IG_STAT
OFF/ON
•  Main power signal status
INSULATION_RES
kohm
•  Insulation resistance value (for leakage resistance measurement)
MOTOR_RPM
rpm
•  Electric motor speed
POWER_MODE
OFF/ACC/ON/CRANK
•  Main power status
SHIFT_POS
Parking/Neutral/Parking/Reverse/Neutral/between 2 position/Forward Drive 1/Forward Drive 2/Forward Drive 3/Forward Drive 4/Forward Drive 5/Forward Drive 6/Forward Drive 7/Invalid
•  Selector lever position status
TOTAL_DIST
km, ft, mi
•  Total traveled distance since vehicle completion
VPWR
V
•  BECM power supply voltage
VPWR_CBCM
V
•  Body control module (BCM) power supply voltage
VSS
KPH, MPH
•  Vehicle speed