PID/DATA MONITOR TABLE [BECM (e-SKYACTIV)]
id300201025800
|
PID/data monitor item |
Unit/Condition |
Definition |
Module control terminal |
|---|---|---|---|
|
12V_BATT_VOLT
|
V
|
• Displays lead-acid battery voltage.
|
7Q
|
|
AMB_TEMP
|
°C, °F
|
• Displays ambient air temperature.
|
CAN (7E, 7H)
|
|
APP
|
%
|
• Displays relative accelerator pedal opening angle.
|
CAN (7E, 7H)
|
|
ASIC_STAT_1
|
Normal/Abnormal
|
• Displays ASIC No.1 status.
|
—
|
|
ASIC_STAT_2
|
Normal/Abnormal
|
• Displays ASIC No.2 status.
|
—
|
|
ASIC_STAT_3
|
Normal/Abnormal
|
• Displays ASIC No.3 status.
|
—
|
|
ASIC_STAT_4
|
Normal/Abnormal
|
• Displays ASIC No.4 status.
|
—
|
|
ASIC_STAT_5
|
Normal/Abnormal
|
• Displays ASIC No.5 status.
|
—
|
|
ASIC_STAT_6
|
Normal/Abnormal
|
• Displays ASIC No.6 status.
|
—
|
|
BATT_HEAT
|
off/on
|
• Displays battery heater on request signal status.
|
—
|
|
BATT_HEAT_AUTO_SW
|
Not Adopted/Auto/Off
|
• Displays battery heater AUTO switch status.
|
—
|
|
BATT_HEAT_AUTO_SW_WRNG
|
Not Warning/Warning
|
• Displays status of the battery heater AUTO switch off warning display.
|
—
|
|
BATT_HEAT_COMD
|
OFF/ON
|
• Displays battery heater operation status.
|
7A
|
|
BATT_HEAT_CONTACTOR
|
OPEN/CLOSE
|
• Displays battery heater contactor open/close status.
|
7A
|
|
BATT_HEAT_EQUIP
|
Battery Heater is not equipped/Battery Heater is equipped
|
• Displays whether or not a battery heater is installed.
|
CAN (7E, 7H)
|
|
BATT_SOC
|
%
|
• Displays lead-acid battery charging status.
|
CAN (7E, 7H)
|
|
BECM_SER_NUM
|
—
|
• Displays BECM serial No.
|
—
|
|
BECM_STAT
|
OFF/INITIAL/STANDBY/PRECHARGE/READY/DISCHARGE/POWER SUSTAIN/FAIL
|
• Displays BECM status.
|
—
|
|
BRK_SW
|
Not Stepping/Stepping
|
• Displays brake pedal status.
|
CAN (7E, 7H)
|
|
CELL_BAL_TEMP_DISTR_0-50
|
times
|
• Displays cell balancing circuit temperature.
|
—
|
|
CELL_BAL_TEMP_DISTR_100-
|
times
|
• Displays cell balancing circuit temperature.
|
—
|
|
CELL_BAL_TEMP_DISTR_50-60
|
times
|
• Displays cell balancing circuit temperature.
|
—
|
|
CELL_BAL_TEMP_DISTR_60-70
|
times
|
• Displays cell balancing circuit temperature.
|
—
|
|
CELL_BAL_TEMP_DISTR_70-80
|
times
|
• Displays cell balancing circuit temperature.
|
—
|
|
CELL_BAL_TEMP_DISTR_80-90
|
times
|
• Displays cell balancing circuit temperature.
|
—
|
|
CELL_BAL_TEMP_DISTR_90-100
|
times
|
• Displays cell balancing circuit temperature.
|
—
|
|
CELL_BALANCE_ENA
|
DISABLE/ENABLE
|
• Displays cell balance control enabled/disabled status.
|
—
|
|
CELL_BALANCE_STAT
|
Off/Running
|
• Displays cell balance control status.
|
—
|
|
CELL_BALANCE_TIME_CHG
|
min
|
• Displays cell balance control operating (normal charging) time.
|
—
|
|
CELL_BALANCE_TIME_SOAK
|
min
|
• Displays cell balance control operating (soaking) time.
|
—
|
|
CELL_FULL_CHG_MAX
|
Asec
|
• Displays maximum fully charged capacity.
|
—
|
|
CELL_FULL_CHG_MAX_NUM
|
—
|
• Displays maximum fully charged capacity cell No.
|
—
|
|
CELL_FULL_CHG_MINI
|
Asec
|
• Displays minimum fully charged capacity.
|
—
|
|
CELL_FULL_CHG_MINI_NUM
|
—
|
• Displays minimum fully charged capacity cell No.
|
—
|
|
CELL_SOC_MAX
|
%
|
• Displays maximum cell charging rate.
|
—
|
|
CELL_SOC_MAX_NUM
|
—
|
• Displays maximum charging rate cell No.
|
—
|
|
CELL_SOC_MINI
|
%
|
• Displays minimum cell charging rate.
|
—
|
|
CELL_SOC_MINI_NUM
|
—
|
• Displays minimum charging rate cell No.
|
—
|
|
CELL_TEMP_MAX
|
°C, °F
|
• Displays cell maximum temperature.
|
—
|
|
CELL_TEMP_MAX_NUM
|
—
|
• Displays maximum temperature cell No.
|
—
|
|
CELL_TEMP_MINI
|
°C, °F
|
• Displays cell minimum temperature.
|
—
|
|
CELL_TEMP_MINI_NUM
|
—
|
• Displays minimum temperature cell No.
|
—
|
|
CELL_VOLT_DISTR_0-10
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_100-
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_10-20
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_20-30
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_30-40
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_40-50
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_50-60
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_60-70
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_70-80
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_80-90
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_DISTR_90-100
|
min
|
• Displays cell voltage variation distribution.
|
—
|
|
CELL_VOLT_MEASURE_1-96
|
V
|
• Displays voltage value (measured value) of each cell No.1 to 96.
|
—
|
|
CELL_VOLT_MONITOR_1-96
|
V
|
• Displays voltage value (monitor value) of each cell No.1 to 96.
|
—
|
|
CHG_CUR_LIM
|
A
|
• Displays maximum allowable charging current value.
|
—
|
|
COLD_START_REQ
|
not cold start/cold start
|
• Displays BECM cold start request signal status.
|
CAN (7E, 7H)
|
|
DC_CHG_VOLT
|
V
|
• Displays QBC monitor voltage value.
|
—
|
|
ENG_RUN_TIME
|
Second
|
• Displays EV system total operating time.
|
CAN (7E, 7H)
|
|
FAIL_LVL
|
Normal/Fail w/o failsafe/Power limit fail/Contactor open fail/Contactor open fail(Quick)/Contactor open fail(Do not restart)
|
• Displays BECM malfunction level.
|
—
|
|
GGDS_VERSION
|
—
|
• Displays BECM GGDS version No.
|
—
|
|
GLOBAL_REAL_TIME
|
min
|
• Displays cumulative elapsed time since vehicle completion.
|
CAN (7E, 7H)
|
|
HV_BATT_CTRL_REQ
|
Normal/Failsafe Req
|
• Displays status of fail-safe request signal received from PCM via CAN communication.
|
—
|
|
HV_BATT_CUR_HI
|
A
|
• Displays high voltage battery (HI range) current value.
|
5D
|
|
HV_BATT_CUR_LO
|
A
|
• Displays high voltage battery (LO range) current value.
|
5A
|
|
HV_BATT_EEV_COMD
|
%
|
• Displays opening angle of the high voltage battery cooling refrigerant valve. (0%: Fully closed)
|
7U, 7V, 7W, 7X
|
|
HV_BATT_EEV_POS
|
%
|
• Displays opening angle of the high voltage battery cooling refrigerant valve.
|
7U, 7V, 7W, 7X
|
|
HV_BATT_IN_REFR_TEMP
|
°C, °F
|
• Displays refrigerant input temperature for high voltage battery cooling.
|
—
|
|
HV_BATT_INTL_RES_CHG
|
mOhm
|
• Displays high voltage battery internal resistance value (charging side).
|
—
|
|
HV_BATT_INTL_RES_DISCHG
|
mOhm
|
• Displays high voltage battery internal resistance value (discharging side).
|
—
|
|
HV_BATT_OUT_REFR_TEMP
|
°C, °F
|
• Displays refrigerant output temperature for high voltage battery cooling.
|
7O
|
|
HV_BATT_REFR_PRES
|
kPa {MPa}, mBar {Bar}, psi, in H20
|
• Displays refrigerant pressure for high voltage battery cooling.
|
7K
|
|
HV_BATT_SOC
|
%
|
• Displays high voltage battery charging rate.
|
—
|
|
HV_BATT_SOC_EST
|
%
|
• Displays high voltage battery estimated charging rate.
|
—
|
|
HV_BATT_TEMP_MAX
|
°C, °F
|
• Displays high voltage battery maximum temperature.
|
—
|
|
HV_BATT_TEMP_MODULE_1-16
|
%
|
• Displays high voltage battery module (No. 1 to 16) temperature.
|
5AG, 5AF, 5AC, 5AM, 5AB, 5Y, 5AL, 5X, 5U, 5T, 5Q, 5P, 5M, 5L, 5I, 5H
|
|
HV_BATT_VOLT
|
V
|
• Displays high voltage battery actual voltage value.
|
6A
|
|
HV_CONTACTOR
|
off/on
|
• Displays main contactor operation status.
|
—
|
|
HV_ENA
|
off/on
|
• Displays high voltage battery system enabled status
|
—
|
|
IG_ON_TIMER
|
Min
|
• Displays elapsed time after main power is switched ON.
|
CAN (7E, 7H)
|
|
IG_STAT
|
OFF/ON
|
• Displays main power signal status.
|
—
|
|
INSULATION_RES
|
kohm
|
• Displays insulation resistance value (for leakage resistance measurement).
|
—
|
|
INSULATION_RES_DETECT_ENA
|
off/on
|
• Displays status of insulation resistance detection permit signal.
|
—
|
|
MOTOR_RPM
|
rpm
|
• Displays electric motor speed.
|
CAN (7E, 7H)
|
|
PCM_WAKE_SIG
|
WakeSignal Off/WakeSignal On
|
• Displays PCM start status.
|
7B
|
|
PCM_WAKE_UP_REQ
|
other/BECM Request Wakeup
|
• Displays PCM start request signal status.
|
CAN (7E, 7H)
|
|
POWER_MODE
|
OFF/ACC/ON/CRANK
|
• Displays main power status.
|
—
|
|
READY_STAT
|
off/on
|
• Displays main power READY status.
|
CAN (7E, 7H)
|
|
SHIFT_POS
|
Parking/Neutral/Parking/Reverse/Neutral/between 2 position/Forward Drive 1/Forward Drive 2/Forward Drive 3/Forward Drive 4/Forward Drive 5/Forward Drive 6/Forward Drive 7/Invalid
|
• Displays selector lever position status.
|
CAN (7E, 7H)
|
|
SOFTWARE_VERSION
|
—
|
• Displays BECM software version No.
|
—
|
|
SOHC_LRN_STAT
|
No Learning/While Learning/Learning Success/Learning Fail
|
• Displays cell capacity deterioration learning status.
|
—
|
|
SOHC_MODULE_1-16
|
%
|
• Displays cell capacity deterioration minimum value for each high voltage battery module (No. 1 to 16).
|
—
|
|
TEMP_DISTR_CHG_0-2
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_10-12
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_12-14
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_14-16
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_16-18
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_18-20
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_20-22
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_22-24
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_2-4
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_24-26
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_26-28
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_28-30
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_30-
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_4-6
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_6-8
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_CHG_8-10
|
min
|
• Displays high voltage battery temperature variation distribution (during normal charging / rapid charging).
|
—
|
|
TEMP_DISTR_COOLING_0-2
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_10-12
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_12-14
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_14-16
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_16-18
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_18-20
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_20-22
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_22-24
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_2-4
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_24-26
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_26-28
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_28-30
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_30-
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_4-6
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_6-8
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_COOLING_8-10
|
min
|
• Displays high voltage battery temperature variation distribution (during battery cooling).
|
—
|
|
TEMP_DISTR_HEAT_0-2
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_10-12
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_12-14
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_14-16
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_16-18
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_18-20
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_20-22
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_22-24
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_2-4
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_24-26
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_26-28
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_28-30
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_30-
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_4-6
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_6-8
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_HEAT_8-10
|
min
|
• Displays high voltage battery temperature variation distribution (when battery heater is ON).
|
—
|
|
TEMP_DISTR_IGON_0-2
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_10-12
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_12-14
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_14-16
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_16-18
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_18-20
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_20-22
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_22-24
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_2-4
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_24-26
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_26-28
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_28-30
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_30-
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_4-6
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_6-8
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_IGON_8-10
|
min
|
• Displays high voltage battery temperature variation distribution (while main power is switched ON).
|
—
|
|
TEMP_DISTR_SOAK_0-2
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_10-12
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_12-14
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_14-16
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_16-18
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_18-20
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_20-22
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_22-24
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_2-4
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_24-26
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_26-28
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_28-30
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_30-
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_4-6
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_6-8
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TEMP_DISTR_SOAK_8-10
|
min
|
• Displays high voltage battery temperature variation distribution (during soak).
|
—
|
|
TOTAL_DIST
|
km, ft, mi
|
• Displays total traveled distance since vehicle completion.
|
CAN (7E, 7H)
|
|
VEH_POWER_CONDITION
|
POWER OFF/IG SW/QBC/QBC(CHAdeMO)/QBC(COMBO)/heating while soak/other
|
• Displays main power status.
|
CAN (7E, 7H)
|
|
VPWR
|
V
|
• Displays BECM power supply voltage.
|
7P
|
|
VPWR_CBCM
|
V
|
• Displays body control module (BCM) power supply voltage.
|
CAN (7E, 7H)
|
|
VSS
|
KPH, MPH
|
• Displays vehicle speed.
|
CAN (7E, 7H)
|