CHARGE PORT INSPECTION

id304200000600

Warning

<<High voltage>>

•  If the necessary measures are not taken before servicing an electric vehicle, it could cause electrical shock and result in serious injury or, in the worst case, death. Before servicing the electric vehicle, refer to [HIGH VOLTAGE SERVICE CAUTIONS] in the general information and implement the necessary measures. (See HIGH VOLTAGE SERVICE CAUTIONS.)

High Voltage Part Inspection And Removal/Installation Notes

Warning

<<High voltage>>

•  If necessary measures such as wearing the correct protective gear are not taken when inspecting or removing/installing the high voltage parts, it could cause electrical shock and result in serious injury or, in the worst case, death.

•  Before inspecting or removing/installing the high voltage parts, refer to [HIGH VOLTAGE SERVICE CAUTIONS] in the general information and [High Voltage Part Inspection and Removal/Installation Notes] of the high voltage system service cautions and implement the necessary measures and preparations. (See HIGH VOLTAGE SERVICE CAUTIONS.) (See HIGH VOLTAGE SYSTEM SERVICE CAUTIONS.)

Visual Inspection

1.  Wear insulating gloves and remove the service plug.

(See SERVICE PLUG REMOVAL/INSTALLATION.)

2.  Wear insulating gloves and verify that the charging inlet connector is free of deformation, color change, distortion, cracking, and foreign matter adhering to it.

•  If there is deformation, color change, distortion, or cracking, wear insulating gloves and replace the charge port assembly. (See CHARGE PORT ASSEMBLY REMOVAL/INSTALLATION.)

•  Wear insulation gloves and remove foreign matter if any.