SIMULATION TABLE [PCM (SKYACTIV-G)]

id0102t4350100

—: Not applicable

Simulation item

Unit/Condition

Definition

Operation condition

Engine condition

Other condition
A/C_SW
Off/On
•  Select Off/On to disengage/engage the magnetic clutch.
•  Ignition is switched ON (engine off)
—
AIRSHUT_POS_COMD
Note
•  Displays in the M-MDS but it does not operate.
CHARGE_LAMP
No(False)/Yes(True)
•  Select No(False)/Yes(True) to turn on/off the charging system warning light.
•  Select No(False)/Yes(True) to display/not display the charging system warning indication on the multi-information display.
•  Ignition is switched ON (engine off)
•  Idle
•  Racing (not idle)
—
CSTR_VENT_SOL_DUTY
Note
•  Displays in the M-MDS but it does not operate.
EGR_COMD
Note
•  Displays in the M-MDS but it does not operate.
ENG_COOL_VLV_POS_COMD
° (deg)
•  Changes ° and forcibly drives/stops the coolant control valve.
•  Ignition is switched ON (engine off)
Note
•  Override drive parameter input range: 0—119°
ENG_RPM_DSD
Rpm
•  Changes value (Rpm) to forcibly vary the engine speed.
•  Idle
•  Racing (not idle)
Note
•  Override drive parameter input range: 550—2,000 Rpm
EX_SHUT_VLV_DSD
Note
•  Displays in the M-MDS but it does not operate.
FAN
Note
•  Displays in the M-MDS but it does not operate.
FP_DUTY
%
•  Changes % and forcibly drives/stops the fuel pump.
•  Ignition is switched ON (engine off)
•  Idle
•  Racing (not idle)
Warning
•  Do not use the simulation function while the fuel hose between the high pressure fuel pump and fuel pump is removed.
Note
•  Override drive parameter input range: 5—95%
FUEL_PUMP_REQ
Off/On
•  Select Off/On to forcibly drive/stop the fuel pump.
•  Ignition is switched ON (engine off)
•  Idle
•  Racing (not idle)
—
H_SPD_FAN
Off/On
•  Select Off/On to forcibly drive/stop the cooling fan at high speed.
—
—
INJ
Fuel Injector 1 requested closed/
Fuel Injector 2 requested closed/
Fuel Injector 3 requested closed/
Fuel Injector 4 requested closed/
All Fuel Injectors requested closed
•  Forcibly stops the fuel injectors while the engine is idling.
•  Idle
Warning
•  Do not use the simulation function while the vehicle is being driven. Stopping the fuel ejection causes the engine to stall which may cause the brakes to not function.
L_SPD_FAN
Off/On
•  Select Off/On to forcibly drive/stop the cooling fan at low speed.
—
—
MIL
Off/On
•  Select Off/On to turn on/off the check engine light.
•  Ignition is switched ON (engine off)
•  Idle
•  Racing (not idle)
—
OIL_PRES_SOL
Off/On
•  Changes Off/On and forcibly drives/stops the engine oil solenoid valve.
—
—
OIL_PUMP_DUTY
% Duty Cycle
•  Changes % and forcibly drives/stops the engine oil solenoid valve.
•  Ignition is switched ON (engine off)
•  Idle
Note
•  Override drive parameter input range: 0—100%
PRG_DUTY
%
•  Changes % and forcibly drives/stops the purge solenoid valve.
•  Ignition is switched ON (engine off)
•  Idle
Note
•  Override drive parameter 0%: Purge solenoid valve is closed
•  Override drive parameter 100%: Purge solenoid valve is opened
•  Override drive parameter input range: 0—100%
WHEEL_DRIVE_CTRL_COMD*1
—
•  Forcibly drives/stops the AWD solenoid built into the coupling component.
•  Ignition is switched ON (engine off)
•  Idle
•  Racing (not idle)
Note
•  If the AWD solenoid is forcibly driven, the AWD warning light flashes.
•  Override drive parameter 1: AWD solenoid is stopped
•  Override drive parameter 2: AWD solenoid is operated

*1  :Vehicles with i-ACTIV AWD system