OIL PRESSURE INSPECTION [SKYACTIV-G 2.0]

id0111h3800300

1.  Connect the M-MDS to the DLC-2.

2.  Start the engine and warm it up.

3.  Select the engine hydraulic pressure (PCM PID: OIL_PRES) and the engine speed (PCM PID: ENG_RPM) using the M-MDS data monitor function. (See PID/DATA MONITOR INSPECTION.) (See PID/DATA MONITOR TABLE [PCM (SKYACTIV-G)].)

4.  Verify the engine hydraulic pressure (PID: OIL_PRES) value while the engine maintains a constant speed.

•  If not within the specification, determine the malfunctioning location referring to the following DTCs [Possible Cause] and repair or replace the applicable part.

―  P0524:00 (Engine oil pressure too low)

―  P055F:00 (Engine oil pressure malfunction)

•  If within the standard, the oil pressure is normal therefore the inspection is completed.

Note

•  The oil pressure can vary with oil viscosity, temperature, and engine speed.