SUSPENSION TECHNICAL DATA

id025000800100

Front wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Maximum steering angle
[Tolerance ±3°]
Inner
38°42′
Outer
31°30′
Total toe-in
Tire
[Tolerance ±4 {0.16}]
(mm {in})
1.0 {0.04}
Rim inner
[Tolerance]
18 inch wheel: ±2.7 {0.11}
Vehicle equipped with 18 inch wheel: 0.6 {0.03}
(degree)
0°05′±0°11′
Caster angle*2 (Reference value)
[Tolerance ±1°]
4°16′
4°18′
4°20′
4°22′
4°24′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-0°28′
-0°29′
-0°29′
-0°29′
-0°29′
Steering axis inclination (Reference value)
12°24′
12°25′
12°25′
12°26′
12°26′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°00′.

Rear wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
Tire
[Tolerance ±5 {0.20}]
(mm {in})
5.4 {0.21}
Rim inner
[Tolerance
18 inch wheel: ±3.3 {0.13}]
Vehicle equipped with 18 inch wheel: 3.5 {0.14}
(degree)
0°27′±0°22′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-1°27′
-1°28′
-1°28′
-1°29′
-1°29′
Thrust angle (Reference value) [Tolerance ±0°48′]
0°00′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°00′.

Standard tire and wheel

Item

Specification
Wheel
Size
18 × 7J
Material
Aluminum alloy
Inset
(mm {in})
45 {1.8}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Tire
Size
215/55 R18 95H
Air pressure
(kPa {bar <psi>})
Front
Up to 3 persons
250 {2.5, <36>}
Full load
260 {2.6, <38>}
Rear
Up to 3 persons
250 {2.5, <36>}
Full load
280 {2.8, <41>}
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Wheel and tire runout
(mm {in})
Lateral direction
2.0 {0.079} max.
Radial direction
1.5 {0.059} max.
Wheel imbalance
Inside
(g {oz})
Knock-type*1:
8 {0.3} max.
Outside
(g {oz})
Adhesive-type*2:
12 {0.42} max.
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
108—147 {12—14, 80—108}

*1  :Do not install three or more weights. One weight is 60 g {2.1 oz} or less and two weights are 100 g {3.53 oz} or less.
*2  :Do not install four or more weights. Do not affix the weights such that they are parallel to each other or overlapping. One weight is 120 g {4.23 oz} or less and three weights are 160 g {5.64 oz} or less.

Temporary spare tire and wheel

Item

Specification
Wheel
Size
17 × 4T
Inset
(mm {in})
35 {1.4}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Steel
Tire
Size
T135/80D17 103M
Air pressure
(kPa <psi>)
420 <60>
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
108—147 {12—14, 80—108}

Suspension

Item

Specification
Front lower arm ball joint stud starting torque
17 N·m {1.7 kgf·m, 12 ft·lbf} or less
Front lower arm ball joint stud rotational torque
3.2 N·m {33 kgf·cm, 28 in·lbf} or less
Front stabilizer control link ball joint starting torque
0.5—4.6 N·m {5.1—46 kgf·cm, 4.5—40 in·lbf}