TRANSFER OIL REPLACEMENT [ET6AX-EL]

id0316j1700300

Replacement Part

Washer
 
Quantity: 1
 
Location of use: Drain plug
Washer
 
Quantity: 1
 
Location of use: Oil level plug

Oil and Chemical Type

Transfer oil
 
MAZDA LONG LIFE HYPOID GEAR OIL SG1

1.  Remove the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)

2.  Remove the drain plug with the washer.

ac30zw00001920

3.  Drain the Transfer oil.

4.  Install the drain plug with a new washer.

ac30zw00001920

5.  Remove the front crossmember component. (See FRONT CROSSMEMBER REMOVAL/INSTALLATION.)

6.  Remove the exhaust manifold (WU-TWC). (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

7.  Remove the heat shield. (See TRANSFER REMOVAL/INSTALLATION [ET6AX-EL].)

8.  Remove the transfer bracket. (See TRANSFER REMOVAL/INSTALLATION [ET6AX-EL].)

9.  Remove the oil level plug and washer, and then add transfer oil from the oil level plug installation hole.

ac30zw00001921

Transfer oil type

Transfer oil capacity (approx. quantity)
MAZDA LONG LIFE HYPOID GEAR OIL SG1
0.35 L {0.37 US qt, 0.31 Imp qt}

10.  Install the oil level plug with a new washer.

ac30zw00001921

11.  Install the transfer bracket. (See TRANSFER REMOVAL/INSTALLATION [ET6AX-EL].)

12.  Install the heat shield. (See TRANSFER REMOVAL/INSTALLATION [ET6AX-EL].)

13.  Install the exhaust manifold (WU-TWC). (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

14.  Install the front crossmember component. (See FRONT CROSSMEMBER REMOVAL/INSTALLATION.)

15.  Install the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)