SIMULATION TABLE [TCM (ET6A-EL, ET6AX-EL)]
id0502q9290800
Simulation item table
|
Item |
Description |
Unit/Condition |
Operation condition |
|---|---|---|---|
|
AUX_FLD_PUMP_DUTY_COMD
|
Electric AT oil pump duty cycle
|
%
|
Under the following conditions:
• Engine stopped
• Accelerator pedal fully closed
|
|
AUX_RLY_B
|
Electric AT oil pump relay condition
|
Off/On
|
Under the following conditions:
• Engine stopped
• Accelerator pedal fully closed
|
|
E_OIL_PUMP
|
Electric AT oil pump condition
|
Not Activated/Activated
|
Under the following conditions:
• Engine stopped
• Accelerator pedal fully closed
|
|
SHIFT_SOL_A_CUR
|
Displays in the M-MDS but it does not operate.
|
||
|
SHIFT_SOL_B_CUR
|
Shift solenoid No.1 target current
|
Amp
|
Under the following conditions:
• Vehicle stopped
• Idling at P or N position
|
|
SHIFT_SOL_C_CUR
|
Shift solenoid No.2 target current
|
Amp
|
Under the following conditions:
• Vehicle stopped
• Idling at P or N position
|
|
SHIFT_SOL_D_CUR
|
Shift solenoid No.3 target current
|
Amp
|
Under the following conditions:
• Vehicle stopped
• Idling at P or N position
|
|
SHIFT_SOL_E_CUR
|
Shift solenoid No.4 target current
|
Amp
|
Under the following conditions:
• Vehicle stopped
• Idling at P or N position
|
|
SHIFT_SOL_ON_OFF
|
On/off solenoid condition
|
Off/On
|
Under the following conditions:
• Vehicle stopped
• Idling at P or N position
|
|
TRQ_CON_CLTCH_CUR
|
TCC control solenoid target current
|
Amp
|
Under the following conditions:
• ATF temperature (PID: TFT) is 20 °C {68 °F} or more.
• Output shaft speed (PID: OSS) is 10 rpm or more.
• Turbine/input shaft speed (PID: TSS) is 1,000 rpm or more.
• Brake pedal released
|