GEAR POSITION INDICATION NOT DISPLAYED DURING MANUAL MODE [ET6A-EL, ET6AX-EL]

id0503n6105300

Troubleshooting item	Gear position indication not displayed during manual mode
Description	•  Gear position indication in instrument cluster not displayed during manual mode with the ignition switched ON (engine off or on).
Possible cause	1.  Instrument cluster malfunction Note •  When the ATF temperature is specified value or more, gear fixing is inhibited, the gear position indication is turned off, and the control is changed to the automatic shift control.
System wiring diagram	•  Not applicable
Connector diagram	•  Not applicable

Diagnostic Procedure

Step	Inspection	Results	Action
1	INSPECT INSTRUMENT CLUSTER FOR MALFUNCTION •  Inspect the instrument cluster. (See INSTRUMENT CLUSTER INSPECTION.) •  Is there any malfunction?	Yes	Replace the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
		No	Symptom troubleshooting is completed.