PID/DATA MONITOR TABLE [LIGHT CONTROL MODULE]
id0902s1120500
|
PID |
Unit/Operation |
Data contents |
Module control terminal |
|---|---|---|---|
|
B1_CAL_VOLT
|
—
|
Displays correction value based on calibration of terminal +B1 input voltage
|
—
|
|
B1_VOLT
|
V
|
Displays voltage at light control module terminal +B1
|
—
|
|
B2_CAL_VOLT
|
—
|
Displays correction value based on calibration of terminal +B2 input voltage
|
—
|
|
B2_VOLT
|
V
|
Displays voltage at light control module terminal +B2
|
—
|
|
CAL_COUNT
|
count
|
Displays number of times calibration is performed
|
—
|
|
CAL_CUR_INCLINATION_1
|
—
|
Displays tilt correction value based on calibration of terminal String-1 (LOW GND, +LOW, DRL GND/+LOW and +DRL2) output voltage
|
—
|
|
CAL_CUR_INCLINATION_2
|
—
|
Displays tilt correction value based on calibration of terminal String-2 (+HIGH and FAN SIG) output voltage
|
—
|
|
CAL_CUR_INTERCEPT_1
|
mA
|
Displays correction value of section based on calibration of terminal String-1 (LOW GND, +LOW, DRL GND/+LOW and +DRL2) output voltage
|
—
|
|
CAL_CUR_INTERCEPT_2
|
mA
|
Displays correction value of section based on calibration of terminal String-2 (+HIGH and FAN SIG) output voltage
|
—
|
|
FAN_VOLT
|
V
|
Displays voltage at terminal +FAN
|
—
|
|
HSS_SW_1_1
|
Not equipped/Equipped
|
• Not equipped: HSS switch1 is not equipped.
• Equipped: HSS switch1 is not equipped.
|
—
|
|
HSS_SW_1_2
|
Not equipped/Equipped
|
• Not equipped: HSS switch2 is not equipped.
• Equipped: HSS switch2 is not equipped.
|
—
|
|
HSS_SW_2_1
|
|
||
|
HSS1_CUR_1
|
mA
|
Displays current of HSS switch1
|
—
|
|
HSS1_CUR_2
|
mA
|
Displays current of HSS switch2
|
—
|
|
HSS1_CUR_3
|
|
||
|
HSS1_STAT_1
|
OFF/ON
|
• OFF: HSS switch1 is off.
• ON: HSS switch1 is on.
|
—
|
|
HSS1_STAT_2
|
OFF/ON
|
• OFF: HSS switch2 is off.
• ON: HSS switch2 is on.
|
—
|
|
HSS2_STAT_1
|
|
||
|
IG1_CAL_VOLT
|
—
|
Displays correction value based on calibration of IG1 power supply terminal input voltage
|
—
|
|
IG1_STAT
|
OFF/ON
|
• OFF: IG1 power supply is not input to light control module.
• ON: IG1 power supply is input to light control module.
|
—
|
|
IG1_VOLT
|
V
|
Displays voltage at light control module IG1 power supply terminal
|
—
|
|
INSPECTION_DATA
|
Not complete/Complete
|
• Not complete: Lighting appliance shipment inspection is not completed.
• Complete: Lighting appliance shipment inspection is completed.
|
—
|
|
LCM_POS
|
Right/Left
|
• Right: Light control module is installed on right.
• Left: Light control module is installed on left.
|
—
|
|
LED1_CAL_VOLT_1
|
—
|
Displays tilt correction value based on calibration of terminals +LOW, DRL GND/+LOW and +DRL2 output voltage
|
—
|
|
LED1_CAL_VOLT_2
|
—
|
Displays tilt correction value based on calibration of terminals LOW GND, +LOW and DRL GND/+LOW output voltage
|
—
|
|
LED1_CUR1_DRL
|
mA
|
Displays set current of terminals +LOW, DRL GND/+LOW and +DRL2 when running light is turned on
|
—
|
|
LED1_CUR1_FSM
|
|
||
|
LED1_CUR1_HI
|
mA
|
Displays set current of terminals +LOW, DRL GND/+LOW and +DRL2 when headlight HI is turned on
|
—
|
|
LED1_CUR1_LO
|
mA
|
Displays set current of terminals +LOW, DRL GND/+LOW and +DRL2 when headlight LO is turned on
|
—
|
|
LED1_CUR1_OUTLET1
|
mA
|
Displays set current of terminals +LOW, DRL GND/+LOW and +DRL2
|
—
|
|
LED1_CUR1_OUTLET2
|
mA
|
Displays set current of terminals +LOW, DRL GND/+LOW and +DRL2
|
—
|
|
LED1_CUR1_POS
|
mA
|
Displays set current of terminals +LOW, DRL GND/+LOW and +DRL2 when TNS (parking lights) is turned on
|
—
|
|
LED1_CUR1_TURN
|
mA
|
Displays set current of terminals +LOW, DRL GND/+LOW and +DRL2 when front turn lights is turned on
|
—
|
|
LED1_CUR2_DRL
|
mA
|
Displays set current of terminals LOW GND, +LOW and DRL GND/+LOW when running light is turned on
|
—
|
|
LED1_CUR2_FSM
|
|
||
|
LED1_CUR2_HI
|
mA
|
Displays set current of terminals LOW GND, +LOW and DRL GND/+LOW when headlight HI is turned on
|
—
|
|
LED1_CUR2_LO
|
mA
|
Displays set current of terminals LOW GND, +LOW and DRL GND/+LOW when headlight LO is turned on
|
—
|
|
LED1_CUR2_OUTLET1
|
mA
|
Displays set current of terminals LOW GND, +LOW and DRL GND/+LOW
|
—
|
|
LED1_CUR2_OUTLET2
|
mA
|
Displays set current of terminals LOW GND, +LOW and DRL GND/+LOW
|
—
|
|
LED1_CUR2_POS
|
mA
|
Displays set current of terminals LOW GND, +LOW and DRL GND/+LOW when TNS (parking lights) is turned on
|
—
|
|
LED1_CUR2_TURN
|
mA
|
Displays set current of terminals LOW GND, +LOW and DRL GND/+LOW when front turn lights is turned on
|
—
|
|
LED1_DUTY_1
|
%
|
Displays duty value of terminals +LOW, DRL GND/+LOW and +DRL2
|
—
|
|
LED1_DUTY_2
|
%
|
Displays duty value of terminals LOW GND, +LOW and DRL GND/+LOW
|
—
|
|
LED1_TGT_CUR1_DRL
|
mA
|
Displays target value of terminals +LOW, DRL GND/+LOW and +DRL2 output current when running light is turned on
|
—
|
|
LED1_TGT_CUR1_FSM
|
|
||
|
LED1_TGT_CUR1_HI
|
mA
|
Displays target value of terminals +LOW, DRL GND/+LOW and +DRL2 output current when headlight HI is turned on
|
—
|
|
LED1_TGT_CUR1_LO
|
mA
|
Displays target value of terminals +LOW, DRL GND/+LOW and +DRL2 output current when headlight LO is turned on
|
—
|
|
LED1_TGT_CUR1_OUTLET1
|
mA
|
Displays target value of terminals +LOW, DRL GND/+LOW and +DRL2 output current
|
—
|
|
LED1_TGT_CUR1_OUTLET2
|
mA
|
Displays target value of terminals +LOW, DRL GND/+LOW and +DRL2 output current
|
—
|
|
LED1_TGT_CUR1_POS
|
mA
|
Displays target value of terminals +LOW, DRL GND/+LOW and +DRL2 output current when TNS (parking lights) is turned on
|
—
|
|
LED1_TGT_CUR1_TURN
|
mA
|
Displays target value of terminals +LOW, DRL GND/+LOW and +DRL2 output current when front turn lights is turned on
|
—
|
|
LED1_TGT_CUR2_DRL
|
mA
|
Displays target value of terminals LOW GND, +LOW and DRL GND/+LOW output current when running light is turned on
|
—
|
|
LED1_TGT_CUR2_FSM
|
|
||
|
LED1_TGT_CUR2_HI
|
mA
|
Displays target value of terminals LOW GND, +LOW and DRL GND/+LOW output current when headlight HI is turned on
|
—
|
|
LED1_TGT_CUR2_LO
|
mA
|
Displays target value of terminals LOW GND, +LOW and DRL GND/+LOW output current when headlight LO is turned on
|
—
|
|
LED1_TGT_CUR2_OUTLET1
|
mA
|
Displays target value of terminals LOW GND, +LOW and DRL GND/+LOW output current
|
—
|
|
LED1_TGT_CUR2_OUTLET2
|
mA
|
Displays target value of terminals LOW GND, +LOW and DRL GND/+LOW output current
|
—
|
|
LED1_TGT_CUR2_POS
|
mA
|
Displays target value of terminals LOW GND, +LOW and DRL GND/+LOW output current when TNS (parking lights) is turned on
|
—
|
|
LED1_TGT_CUR2_TURN
|
mA
|
Displays target value of terminals LOW GND, +LOW and DRL GND/+LOW output current when front turn lights is turned on
|
—
|
|
LED1_VOLT_1
|
V
|
Displays voltage at terminals +LOW, DRL GND/+LOW and +DRL2
|
—
|
|
LED1_VOLT_2
|
V
|
Displays voltage at terminals LOW GND, +LOW and DRL GND/+LOW
|
—
|
|
LED2_CAL_VOLT_1
|
—
|
Displays tilt correction value based on calibration of terminals +HIGH and FAN SIG output voltage
|
—
|
|
LED2_CUR1_DRL
|
mA
|
Displays set current of terminals +HIGH and FAN SIG when running light is turned on
|
—
|
|
LED2_CUR1_FSM
|
|
||
|
LED2_CUR1_HI
|
mA
|
Displays set current of terminals +HIGH and FAN SIG when headlight HI is turned on
|
—
|
|
LED2_CUR1_LO
|
mA
|
Displays set current of terminals +HIGH and FAN SIG when headlight LO is turned on
|
—
|
|
LED2_CUR1_OUTLET1
|
mA
|
Displays set current of terminals +HIGH and FAN SIG
|
—
|
|
LED2_CUR1_OUTLET2
|
mA
|
Displays set current of terminals +HIGH and FAN SIG
|
—
|
|
LED2_CUR1_POS
|
mA
|
Displays set current of terminals +HIGH and FAN SIG when TNS (parking lights) is turned on
|
—
|
|
LED2_CUR1_TURN
|
mA
|
Displays set current of terminals +HIGH and FAN SIG when front turn lights is turned on
|
—
|
|
LED2_TGT_CUR1_DRL
|
mA
|
Displays target value of terminals +HIGH and FAN SIG output current when running light is turned on
|
—
|
|
LED2_TGT_CUR1_FSM
|
|
||
|
LED2_TGT_CUR1_HI
|
mA
|
Displays target value of terminals +HIGH and FAN SIG output current when headlight HI is turned on
|
—
|
|
LED2_TGT_CUR1_LO
|
mA
|
Displays target value of terminals +HIGH and FAN SIG output current when headlight LO is turned on
|
—
|
|
LED2_TGT_CUR1_POS
|
mA
|
Displays target value of terminals +HIGH and FAN SIG output current when TNS (parking lights) is turned on
|
—
|
|
LED2_TGT_CUR1_TURN
|
mA
|
Displays target value of terminals +HIGH and FAN SIG output current when front turn lights is turned on
|
—
|
|
LED2_TGT_CUR2_OUTLET1
|
mA
|
Displays target value of terminals +HIGH and FAN SIG output current
|
—
|
|
LED2_TGT_CUR2_OUTLET2
|
mA
|
Displays target value of terminals +HIGH and FAN SIG output current
|
—
|
|
LED2_VOLT_1
|
V
|
Displays voltage at terminals +HIGH and FAN SIG
|
—
|
|
LED3_CAL_VOLT_1
|
—
|
Displays tilt correction value based on calibration of terminals DRL GND output voltage
|
—
|
|
LED3_CUR1_DRL
|
mA
|
Displays set current of terminals DRL GND when running light is turned on
|
—
|
|
LED3_CUR1_FSM
|
|
||
|
LED3_CUR1_HI
|
mA
|
Displays set current of terminals DRL GND when headlight HI is turned on
|
—
|
|
LED3_CUR1_LO
|
mA
|
Displays set current of terminals DRL GND when headlight LO is turned on
|
—
|
|
LED3_CUR1_OUTLET1
|
mA
|
Displays set current of terminals DRL GND
|
—
|
|
LED3_CUR1_OUTLET2
|
mA
|
Displays set current of terminals DRL GND
|
—
|
|
LED3_CUR1_POS
|
mA
|
Displays set current of terminals DRL GND when TNS (parking lights) is turned on
|
—
|
|
LED3_CUR1_TURN
|
mA
|
Displays set current of terminals DRL GND when front turn lights is turned on
|
—
|
|
LED3_DUTY_1
|
%
|
Displays duty value of terminals DRL GND
|
—
|
|
LED3_TGT_CUR1_DRL
|
mA
|
Displays target value of terminals DRL GND output current when running light is turned on
|
—
|
|
LED3_TGT_CUR1_FSM
|
|
||
|
LED3_TGT_CUR1_HI
|
mA
|
Displays target value of terminals DRL GND output current when headlight HI is turned on
|
—
|
|
LED3_TGT_CUR1_LO
|
mA
|
Displays target value of terminals DRL GND output current when headlight LO is turned on
|
—
|
|
LED3_TGT_CUR1_POS
|
mA
|
Displays target value of terminals DRL GND output current when TNS (parking lights) is turned on
|
—
|
|
LED3_TGT_CUR1_TURN
|
mA
|
Displays target value of terminals DRL GND output current when front turn lights is turned on
|
—
|
|
LED3_TGT_CUR2_OUTLET1
|
mA
|
Displays target value of terminals DRL GND output current
|
—
|
|
LED3_TGT_CUR2_OUTLET2
|
mA
|
Displays target value of terminals DRL GND output current
|
—
|
|
LED3_VOLT_1
|
V
|
Displays voltage at terminal DRL GND
|
—
|
|
LVL_ACTAT_VOLT
|
V
|
Displays voltage at terminal LVL SIG
|
—
|
|
LVL_VOLT_RATIO
|
%
|
Displays voltage ratio of terminal LVL SIG
|
—
|
|
STRING_CUR_1
|
mA
|
Displays base current of terminals LOW GND, +LOW, DRL GND/+LOW and +DRL2
|
—
|
|
STRING_CUR_2
|
mA
|
Displays base current of terminals +HIGH and FAN SIG
|
—
|
|
STRING_CUR_3
|
mA
|
Displays base current of terminal DRL GND
|
—
|
|
THERMISTOR_VOLT_1
|
V
|
Displays voltage of terminal HIGH GND
|
—
|
|
THERMISTOR_VOLT_2
|
V
|
Displays voltage of terminal THERM
|
—
|
|
THERMISTOR_VOLT_INSIDE
|
V
|
Displays voltage of internal thermistor
|
—
|