REAR DOOR RELEASE HANDLE REMOVAL/INSTALLATION

id091400201100

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the rear door lower trim. (See REAR DOOR LOWER TRIM REMOVAL/INSTALLATION.)

3.  Remove the screws.

a30zzw00002482

4.  Remove the guide from the rear door panel and remove the rear door release handle.

5.  Disconnect the rear door upper latch cable and the rear door lower latch cable from the rear door release handle.

a30zzw00002483

6.  Install in the reverse order of removal.