SIDE TURN LIGHT INSPECTION

id091800703900

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the side turn light. (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)

3.  Apply battery positive voltage to side turn light terminal A, and connect terminal B to ground.

a30zzw00001725

4.  Verify that the LED illuminates.

•  If the LED illuminates, go to the next step.

•  If the LED does not illuminate, replace the side turn light. (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)

5.  Disconnect the power outer mirror connector. (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)

6.  Verify that the continuity between side turn light terminal and power outer mirror terminal is as indicated in the table.

a30zzw00001726

am6zzw00008097

•  If not as indicated in the table, replace the power outer mirror. (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)