LIFTGATE LIGHT INSPECTION

id091800704100

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the liftgate light from the liftgate. (See LIFTGATE LIGHT REMOVAL/INSTALLATION.)

3.  Apply battery positive voltage and connect the ground to the liftgate light terminals as indicated in the table below and verify that each light turns on normally.

a30zzw00001728

B+ terminal	Ground terminal	Condition
		Back-up light	Taillight
A	E	Turns ON	Turns OFF
B	E	Turns OFF	Turns ON

•  If each light does not turn on, replace the liftgate light. (See LIFTGATE LIGHT REMOVAL/INSTALLATION.)