AUTO LEVELING CONTROL MODULE INSPECTION

id091800704500

Note

•  The integrity of the auto leveling control module cannot be determined from a single part. When inspecting the auto leveling control module, perform the following procedure.

1.  Connect the M-MDS to the DLC-2.

2.  Perform the DTC inspection for the auto leveling control module and verify if any DTCs related to the auto leveling control module is detected. (See DTC INSPECTION.)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [AUTO LEVELING CONTROL MODULE].)