TORQUE BOX REMOVAL [PANEL REPLACEMENT]

id098008607100

Symbol Mark

ac5uub00000086

Removal Procedure

1.  Drill the spot welds in the 11 locations in area A shown in the figure.

Note

•  When drilling the spot welds in the 11 locations in area A shown in the figure, do not drill through-holes in consideration of the workability when installing.

2.  Drill the spot welds in the 11 locations in area B shown in the figure.

a30zzb00000016

3.  Remove the torque box (front).

4.  Drill the spot welds in the 6 locations in area C shown in the figure.

Note

•  When drilling the spot welds in the 6 locations in area C shown in the figure, do not drill through-holes in consideration of the workability when installing.

5.  Drill the spot welds in the 10 locations in area D shown in the figure.

a30zzb00000017

6.  Remove the torque box (rear).