PRE-DELIVERY INSPECTION


id000000801100

Pre-Delivery Inspection Table

Exterior

INSPECT and ADJUST, if necessary, the following part to specification:

□Glass, exterior bright metal and paint for damage

□Convertible top and detachable hardtop (if equipped) for damage

□Power retractable hardtop for damage

□Wheel lug nuts

□All weatherstrips for damage or detachment

□Operation of bonnet release and lock

□Operation of trunk lid and fuel-filler lid

□Door operation and alignment

□Headlight aiming

TRUNK ROOM

□Check spare tire and air pressure

□Inspect operation of trunk lid internal release

INSTALL the following part:

□Wheel caps (if equipped)

□Mast antenna (if equipped)

Under bonnet-engine off

INSPECT and ADJUST, if necessary, the following part to specification:

□Fuel, engine coolant, and hydraulic lines, fittings, connections, and components for leaks

□Engine oil level

□Power steering fluid level

□Brake and clutch master cylinder fluid level

□Washer tank fluid level

□Automatic transmission fluid level

□Radiator coolant level and specific gravity

□Tightness of battery terminals

Interior

INSPECT the operations of the following part:

□Seat controls (slide and recline)

□Seat belts and warning system

□Air bag system using warning light

□Cruise control system (if equipped)

□Ignition switch and steering lock

□Starter interlock (if equipped)

□Power door lock

□Door locks

□All lights including warning, and indicator lights

□Horn, wipers, and washers

□Wiper blades performance

□Audio system

□Power windows (if equipped)

□Heater, defroster, and air conditioner at various mode selections (if equipped)

INSPECT the following part:

□Presence of spare fuse

□Upholstery and interior finish

INSPECT and ADJUST, if necessary, the following part:

□Pedal height and free play of brake and clutch pedal

□Parking brake

Under bonnet-engine running at operating temperature

INSPECT the following part:

□Automatic transmission fluid level

On hoist

INSPECT the following part:

□Underside fuel, coolant and hydraulic lines, fittings, connections, and components for leaks

□Tires for cuts or bruises

□Steering linkage, suspension, exhaust system, and all underside hardware for looseness or damage

□Manual transmission oil level

□Differential oil level

Road test

INSPECT the following part:

□Brake operation

□Clutch operation

□Steering control

□Emergency locking retractors and automatic locking retractors

□Cruise control system (if equipped)

□Operation of meters and gauges, squeaks, rattles, and unusual noises

After road test

INSPECT for necessary owner information materials, tools, and spare tire in vehicle

The following part must be completed just before delivery to your customer.

□Load test battery and charge if necessary (Load test result: Volts)

□Adjust tire pressure to specification

□Clean outside of vehicle

□Install fuses for accessories

□Remove seat and cabin carpet protective covers

□Vacuum inside of vehicle

□Inspect installation of option parts with invoice