1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)
3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [L8, LF].)
4. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [L8, LF].)
5. Remove the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [L8, LF].)
6. Remove the OCV connector.
7. Remove the ventilation hose. (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [L8, LF].)
8. Remove the cylinder head cover. (See Cylinder Head Cover Installation Note.)
9. Remove in the order indicated in the table.
10. Install in the reverse order of removal.