• The cooling fan component consists of the radiator cowling, cooling fan, and cooling fan motor.
• Electric cooling fan, which operates according to the fan control signal from the PCM, has been adopted. Due to this, engine noise has been reduced and rapid engine warming-up is possible.
• The radiator cowling and cooling fan are made of plastic for weight reduction.
Cooling fan, cooling fan motor specification
|
Item
|
Specification
|
||
|---|---|---|---|
|
Cooling fan
|
Number of blades
|
|
5
|
|
Outer diameter
|
(mm {in})
|
360 {14.2}
|
|
|
Cooling fan motor output
|
(W)
|
120
|
|
• Cooling fan operates according to the engine coolant temperature and whether the A/C is on or off. Three-stage control has been adopted to the cooling fan with high, middle, and low speed rotation allowing noise reduction and power savings. (See ELECTRICAL FAN CONTROL OPERATION [L8, LF].)
• The cooling fan may keep operating for a few seconds or minutes after the ignition switch is turned off depending on the engine coolant temperature.