KNOCK SENSOR (KS) REMOVAL/INSTALLATION [L8, LF]

1. Remove the battery cover.

2. Remove the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

3. Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L8, LF].)

4. Disconnect the KS connector.

5. Remove the KS installation bolt, then remove the KS.

6. Install in the reverse order of removal.

KS tightening torque

16-24 N·m {1.7-2.4 kgf·m, 12-17 ft·lbf}