MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REMOVAL/INSTALLATION [L8, LF]

1. Remove the battery cover.

2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF])

3. Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L8, LF].)

4. Remove the MAP sensor.

5. Install in the reverse order of removal.

MAP sensor tightening torque

2.7-3.7 N·m {28-37 kgf·cm, 24-32 in·lbf}