NO.26 STARTER DOES NOT WORK [SJ6A-EL]

id050307803100

26

Starter does not work

DESCRIPTION

• Starter does not work even when in P or N position.

POSSIBLE CAUSE

• Selector lever mis-adjustment
• Manual shaft malfunction
• TR switch malfunction
• TR switch mis-adjustment
• Transmission operates in fail-safe function (Starter lock system related circuit open or short)
• Immobilizer system operating or system malfunction.

Diagnostic procedure

STEP

INSPECTION

ACTION

1
• Inspect selector lever, TR switch and manual shaft positions.
• Are these position normal?
Yes
Go to the next step.
No
Adjust the suspect part position.
2
• Inspect the TR switch.
• Is the TR switch normal?
Yes
Go to engine system troubleshooting No.3 "WILL NOT CRANK" troubleshooting procedure.
No
Replace the TR switch.
3
• Verify test results.
- If normal, return to the diagnostic index to service any additional symptoms.
- If malfunction remains, inspect the related Service Information and perform repair or diagnosis.
• If the vehicle is repaired, troubleshooting completed.
• If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM.