|
STEP
|
INSPECTION
|
ACTION
|
|
|---|---|---|---|
|
1
|
VERIFY NUMBER OF REGISTERED KEYS
• Using the M-MDS, perform the PID/data monitor inspection and confirm the number of registered keys.
• Are one or more keys registered?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 3.
|
||
|
2
|
VERIFY NUMBER OF REGISTERED KEYS
• Using the M-MDS, perform the PID/data monitor inspection and confirm the number of registered keys.
• Are eight keys registered?
|
Yes
|
Using the M-MDS, clear the key ID numbers as necessary, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
INSPECT INSTRUMENT CLUSTER
• Using the M-MDS, register the key ID number.
(See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [WITHOUT ADVANCED KEYLESS SYSTEM].)
• Using the registered key, turn the ignition switch to the ON position.
• Is the DTC displayed again?
|
Yes
|
Replace the instrument cluster and perform the resetting procedure for the immobilizer system when replacing the instrument cluster.
|
|
No
|
DTC troubleshooting completed.
|
||