|
SECURITY LIGHT: 21 |
Only one key ID number is registered.
|
|
DTC: B1213/P1260 |
|
|
DETECTION CONDITION |
• Only one key is registered.
|
|
POSSIBLE CAUSE |
• Only one registered key
|
|
STEP
|
INSPECTION
|
ACTION
|
|
|---|---|---|---|
|
1
|
VERIFY NUMBER OF REGISTERED KEYS
• Using the M-MDS, perform the PID/data monitor inspection and confirm the number of registered keys.
• Are two or more keys registered?
|
Yes
|
Replace the instrument cluster and perform the resetting procedure for the immobilizer system when replacing the instrument cluster.
|
|
No
|
• Using the M-MDS, clear the key ID number and register a new key if necessary.
(See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [WITHOUT ADVANCED KEYLESS SYSTEM].)
• Go to the next step.
|
||
|
2
|
VERIFY DTC
• Using the registered key, turn the ignition switch to the ON position.
• Is the DTC displayed again?
|
Yes
|
Replace the instrument cluster and perform the resetting procedure for the immobilizer system when replacing the instrument cluster.
|
|
No
|
DTC troubleshooting completed.
|
||