WARNING/GUIDANCE FUNCTION OPERATION

id0914b5102800

• If the system is operated improperly, it warns the driver using the indicator light in the instrument cluster, buzzer sound, and keyless beeper in the trunk compartment.
• The operation condition of the advanced keyless system is indicated by the indicator light and beeper sound to guide user's operation.

Item

Operation condition

Keyless buzzer (outside the vehicle)

Instrument cluster

Buzzer (Interior)

Keyless warning light (red)

Keyless indicator light (green)

Warning
Start knob not in LOCK warning
Driver's door is open with start knob in ACC position
-
Continuous
Flashes
-
Card key out of vehicle warning*1
Card key cannot be detected inside vehicle with driver's door open and start knob not in LOCK position
-
Continuous
Flashes*2
-
Card key cannot be detected inside vehicle with all doors closed and start knob not in LOCK position
Sounds 6 times
-
Flashes*3
-
Card key cannot be detected inside vehicle with start knob not in LOCK position and under any condition other than above
-
-
Flashes*2
-
Card key left in vehicle warning
Door/trunk lid is open with proper card key inside vehicle and another card key carried
Continuous for 10 s
-
-
-
Door lock inoperable warning
Request switch is pressed with card key carried and a door open or start knob not in LOCK position
Sounds 6 times
-
-
-
Battery voltage low indication
Card key battery voltage depleted
-
-
-
Flashes
(Approx. 30 s after IG OFF)
Guidance
Start knob operable guidance
Start knob is operable (lock released) when it is pressed
-
-
-
On
(Max. 3 s)
Start knob inoperable guidance
Start knob is inoperable (locked) when it is pressed
-
-
Flashes
-
Lock/unlock answer back
Doors are locked/unlocked with normal/advanced keyless entry function
Locked: Once
Unlocked: Twice
-
-
-

*1 :
If the start knob is turned to the LOCK position with the card key out of the vehicle, the start knob is inoperable (the engine cannot be restarted). For vehicles with the immobilizer system, the engine cannot be restarted by turning the start knob from the ACC position to the START position even though the start knob has not been turned to the LOCK position.
*2 :
Stops flashing and goes out if the card key is detected inside the vehicle.
*3 :
Stops flashing and goes out if the card key is detected inside the vehicle and door is opened.