DECK PANEL MOTOR REMOVAL/INSTALLATION


id091600811300

Caution
• If the deck panel does not operate electrically, see "DECK PANEL MANUAL OPEN/CLOSE PROCEDURE" to open/close the deck panel.
(See DECK PANEL MANUAL OPEN/CLOSE PROCEDURE.)

1. Fully open the deck panel.

2. Remove the battery cover.

3. Disconnect the negative battery cable.(See BATTERY REMOVAL/INSTALLATION [L8, LF].)

4. Set the side shelf out of the way.(See SIDE SHELF REMOVAL/INSTALLATION.)

5. Remove the deck panel.(See DECK PANEL REMOVAL/INSTALLATION.)

6. Remove the screws indicated in the figure.

7. Remove the deck panel motor.

8. Install in the reverse order of removal.