NEUTRAL SWITCH INSPECTION [L8, LF]


id0140i7800800

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

2.  Disconnect the negative battery cable.

3.  Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [M15M-D].) (See NEUTRAL SWITCH REMOVAL/INSTALLATION [P66M-D].)

4.  Inspect for continuity between the neutral switch terminals using an ohmmeter.

am6xuw00001347

•  If not as specified, replace the neutral switch.
(See NEUTRAL SWITCH REMOVAL/INSTALLATION [M15M-D].) (See NEUTRAL SWITCH REMOVAL/INSTALLATION [P66M-D].)

Specification

Measured condition

Continuity

Rod pushed
Continuity detected
Except above
No continuity