HEATED OXYGEN SENSOR (HO2S) REMOVAL/INSTALLATION [L8, LF]

id0140i7804000

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

3.  Install the SST to the HO2S.

amxzzw00000126

4.  Remove the HO2S.

5.  Install in the reverse order of removal.

HO2S tightening torque
29—49 N·m {3.0—4.9 kgf·m, 22—35 ft·lbf}