MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REMOVAL/INSTALLATION [L8, LF]

id0140i7805500

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

3.  Disconnect MAF/IAT sensor connector.

4.  Remove the MAF/IAT sensor.

e5u140zw5302

5.  Install in the reverse order of removal.

MAF/IAT sensor tightening torque
0.55—0.82 N·m {5.7—8.3 kgf·cm, 4.9—7.2 in·lbf}