ON-BOARD DIAGNOSTIC SYSTEM ACTIVE COMMAND MODES FUNCTION [ABS]

id0402a7181500

•  The active command modes function is used for optionally selecting active command modes items of input/output parts preset in the ABS HU/CM, and to operate them regardless of CM control.
•  To protect the hydraulic unit interior, operate output related parts for only 10 s or less when using the active command modes function.

Active Command Modes Table

Command name

Output part name

Operation

Operation condition
LF_INLET
LF inlet solenoid valve
Off/On
Ignition switch at ON
LF_OUTLET
LF outlet solenoid valve
LR_INLET
LR inlet solenoid valve
LR_OUTLET
LR outlet solenoid valve
PMP_MOTOR
Pump motor
RF_INLET
RF inlet solenoid valve
RF_OUTLET
RF outlet solenoid valve
RR_INLET
RR inlet solenoid valve
RR_OUTLET
RR outlet solenoid valve