ON-BOARD DIAGNOSTIC SYSTEM ACTIVE COMMAND MODES FUNCTION [DYNAMIC STABILITY CONTROL (DSC)]

id0402b2175300

•  The active command modes function is used for optionally selecting active command modes items of input/output parts preset in the DSC HU/CM, and to operate them regardless of CM control.
•  To protect the hydraulic unit interior, operate output related parts for only 10 s or less when using the active command modes function.

Active Command Modes Table

Command name

Output part name

Operation

Operation condition
LATACCEL
Combined sensor (lateral acceleration) initialization
FALSE/TRUE
Ignition switch at ON
LF_INLET
LF inlet solenoid valve
Off/On
LF_OUTLET
LF outlet solenoid valve
LR_INLET
LR inlet solenoid valve
LR_OUTLET
LR outlet solenoid valve
PMP_MOTOR
Pump motor
RF_INLET
RF inlet solenoid valve
RF_OUTLET
RF outlet solenoid valve
RR_INLET
RR inlet solenoid valve
RR_OUTLET
RR outlet solenoid valve
SAS_CAL
Steering angle sensor initialization
FALSE/TRUE
STAB_IND
DSC indicator light
Off/On
TRAC_OFF
DSC OFF switch
V_STB_L
LH stability control solenoid valve
V_STB_R
RH stability control solenoid valve
V_TRC_L
LH traction control solenoid valve
V_TRC_R
RH traction control solenoid valve
YAWRATE
Combined sensor (yaw rate) initialization