ELECTRONIC CONTROL ITEMS AND CONTENTS [SJ6A-EL]

id051311324800

Item

Content

Shift control

•  Detects engine load and vehicle speed, and switches to optimum gear in accordance with preset shift program.

•  In D range, automatically switches between NORMAL, AAS, DOWN-SLOPE, UP-SLOPE modes according to specific conditions.

Manual mode shift control

•  Shifts to selected gear position by manual shifting of the selector lever forward and back.

•  The up/down operation of the steering shift switch is the same as the manual operation of the selector lever.

Direct mode control

•  Shifts temporarily by using the steering shift switch even when the selector lever is in the D range

TCC control

•  According to preset TCC point, performs TCC operation.

5-6 shift inhibit control

•  Inhibits shift change from the 5th to 6th gears when the engine is cold.

Torque reduction control

•  Optimally controls engine output torque when shifting.

Line pressure control

•  Controls line pressure according to driving conditions.

Shift learning control

•  Performs optimal correction for clutch engagement pressure to reduce changes in engine performance and/or elapsed transmission.

On-board diagnostic system

•  Detects and/or memorizes failure of input/output part and transmission condition.

Item	Content
Shift control	• Detects engine load and vehicle speed, and switches to optimum gear in accordance with preset shift program. • In D range, automatically switches between NORMAL, AAS, DOWN-SLOPE, UP-SLOPE modes according to specific conditions.
Manual mode shift control	• Shifts to selected gear position by manual shifting of the selector lever forward and back. • The up/down operation of the steering shift switch is the same as the manual operation of the selector lever.
Direct mode control	• Shifts temporarily by using the steering shift switch even when the selector lever is in the D range
TCC control	• According to preset TCC point, performs TCC operation.
5-6 shift inhibit control	• Inhibits shift change from the 5th to 6th gears when the engine is cold.
Torque reduction control	• Optimally controls engine output torque when shifting.
Line pressure control	• Controls line pressure according to driving conditions.
Shift learning control	• Performs optimal correction for clutch engagement pressure to reduce changes in engine performance and/or elapsed transmission.
On-board diagnostic system	• Detects and/or memorizes failure of input/output part and transmission condition.