KEYLESS RECEIVER INSPECTION

id091400437800

1.  Measure the voltage or inspect for continuity according to the Terminal Voltage Table (Reference).

•  If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under “Inspection item(s)” and related wiring harnesses.

Terminal Voltage Table (Reference)

e6u914zw1007

Terminal	Signal name	Connected to	Measured condition	Voltage (V)/Continuity	Inspection item(s)
A	Power supply	Keyless control module	Under any condition	B+	•  Keyless control module •  Related wiring harnesses
C	Data	Keyless control module	Under any condition: Inspect the wiring harness between the keyless receiver and keyless control module terminal 3U for continuity.	Continuity detected	•  Keyless control module •  Related wiring harnesses
E	GND	Body ground	Under any condition: Inspect for continuity to ground.	Continuity detected	GND