ELECTRICAL SYSTEM

id000000800400

Connectors

Disconnecting connectors

•  When disconnecting a connector, grasp the connectors, not the wires.

acxuuw00000454

•  Connectors can be disconnected by pressing or pulling the lock lever as shown.

acxuuw00000455

Locking connector

•  When locking connectors, listen for a click indicating they are securely locked.

acxuuw00000456

Inspection

Caution

•  To prevent damage to the terminal, wrap a thin wire around the tester probe before inserting into terminal.

•  When a tester is used to inspect for continuity or measuring voltage, insert the tester probe from the wiring harness side.

acxuuw00000457

•  Inspect the terminals of waterproof connectors from the connector side since they cannot be accessed from the wiring harness side.

acxuuw00000458